Perform a Bare Metal Restore on a Hyper-V Cloud Server
- Download the provided System-Restore.iso.
- Upload the disk image on the virtual disk of the Cloud Server.
- Connect to the Cloud Server via the Recovery Console.
- From the Recovery Console reboot the Server and then press F8 to exclude the system boot and upload the content of the virtual disk.
- After rebooting from the disk you will reach the "EVault System Restore" page, where you need to configure the time and language of the keyboard.
- Select the "Virtual Machines" tab, then select the Cloud Server and right-click on the "Open Console" option,
- a window like the following will open.
- Open the Control Panel and reboot the Cloud Server, click in the new window and once the window changes size press "Esc".
- You will then reach the "Boot Menu",
- by using the keyboard arrows, move to the "CD-ROM Drive" option and press "Enter".
- When reaching the "EVault System Restore" page you will need to configure the time and language of the keyboard,
- by clicking on "Next >" a page will open asking you to accept the licence agreement. Accept and click "Next >".
- Select the first option "Restore My System",
- confirm by clicking "Next >".
- Click on "Restore Settings" at the bottom.
- Select the Cloud Server connected to the public network,
- and press "Properties".
- Select "Use the following IP Address" and enter the values of the Cloud Server. Confirm by clicking "Apply".
- Once you are back on this page, enter the values of the "Vault" field (see guide). Confirm by clicking "Next >".
- Select the Cloud Server on which you wish to restore the Bare Metal. Confirm by clicking "Next >".
- Select the "BareMetal" Job name. Confirm by clicking "Next >".
- Select the date of the Bare Metal you wish to restore. Confirm by clicking "Next >".
- Drag the volumes from the source system (backup) to the destination system (Cloud Server).
- By leaving a source volume on a destination volume you will need to select the recovery mode: select "Format".
- After completing the configuration, confirm by clicking "Next >".
- Confirm the process by clicking "Click here to confirm the restore plan" found at the bottom and click "Next >".
- Now the recovery process will begin.
- Once completed confirm by clicking "Next >".
- Click "Next >".
- Click "Next >".
- Wait for the system to find the matching hardware between the Bare Metal and the destination Cloud Server.
- Click "Close" to complete the Bare Metal recovery process.
After completing the Bare Metal recovery process reboot the Cloud Server.